|Type:||Real Time Tracking||Network:||2G,GSM/GPRS 850/900/1800/1900MHz|
|Use:||Fleet Management||Function:||Anti Theft,geo Fence,driving Behavior|
|Gsm Frequency:||Quad-band 850/900/1800/1900 MHz||Module:||Quectel MC25|
MT200 is real time motorcycle gps tracker 2g multiple hidden gps tracker for motorcycle,cars,ebikes and escooters.This one is a hardwired tracker with BLE for tracking powered assets and vehicles, with ignition detection and output for relay/buzzer/siren.
When the battery voltage on the vehicle is too low (0-11V or 19-22V), device will report a low voltage alarm to the backend
When the vehicle speed is higher than the preset alarm value, the device will notify the backend. Similarly, when the vehicle speed is lower than preset alarm value, a low speed alarm will be uploaded to the backend, this value is configurable.
The device is built in with G-sensor, which can detect speeding, hard deceleration, hard acceleration and Cornering alarm
If someone turn over the device, it will report an alarm.
The device supports vibration alarm, 10 minutes after the ignition off (Arm range 1-20 minutes), the device generates vibration (Delay range 1-10 mins) without ACC connected, the device will upload vibration alarm.
An alarm is generated when the device is set to a displacement of more than 100 meters (message mode prompt), and the alarm information is reported when the displacement radius exceeds 100 meters when the device is turned off. (Note: displacement range 100~2000m).
The device will send SMS if the vehicle is moved in ignition off status, if the radius is more than 100 meters, will upload towing alarm (Towing range:100-2000m).
The device is allowed to connect a power off relay for power and fuel cut off function in case a car stolen happens, a command can be sent to the device to remote cut off the fuel and power, please note only the preconfigured center number can send such command.
When the device detects that the GPS module is working abnormally, it reports the GPS receiver failure alarm to the backend.
Device is with built in light sensor, when it detects the lights vary, it will report removal alarm to the backend
|Cellular||GSM module||Quectel MC25|
Working Frequency: 850/900/1800/1900MHz
Network protocol: Embedded TCP/IP stack
Accuracy: 5m CEP
|Battery||NI-MH AAA 3.6V/60mA|
Average Current: <30mA
Maximum current: <10mA
|Interface||Digital input(2)||Ignition detect and Air condition status detect|
|Analog input 1||Voltage range:0-36V|
|GSM antenna||Antenna inside|
|GPS antenna||Antenna inside|
|Indicator||Green: GPS, Red: GSM|
|Environmental Parameter||Working Temperature||-20℃ ~ +70℃|
|Humidity||5% ~ 95% (no fog)|
|Ingress Protection Rating||IP65|
Kingwo also provide software package along with MT200 models and many others from our company, see below details:
Web-based software: www.itracksense.com
Smart phone Application: Track Sense
Contact Person: Ura Lee