|
Product Details:
|
| Battery: | 8100Mah Lithium ION | G - Sensor: | 3 Axis |
|---|---|---|---|
| GPS: | High Sensitive GPS | Celluar: | QUECTEL BG95 |
| Waterproof: | IP67 Protection | PCB: | 4 Layers |
| Color: | Black And Red | ||
| High Light: | IP67 water resistant gps tracker,Lte-M water resistant gps tracker,IP67 real time location tracker |
||
NT07EM is an Advanced IP67 water resistance Lte - M Quick Installation Celluar GPS Pallets Tracker ,it has IP67 water resistance enclosure, and it has built in magnets for fast and quick installation, screw mount is also available for fasten to objects which has no metal.
Features:
1. IP67 waterproof Resistance
2. Fast and fast installation
3. Global CatM1 and NBIOT techonlogoy
4. Smart work modes
5. Jamming detection
6. Ultra low power consumption
7. Strong magnetic and screw mount for easy installation
8. Vibration alert
Specifications:
| Physical | Dimension | 81mm*51mm*31mm(L*W*H) |
| Weight | 192±8g | |
| Cellular | Communication module | Quectel BG95 |
| Frequency |
Working frequency: • Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 |
|
| GPS |
Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
|
| Power | Battery |
Disposable Lithium-ion battery and (3.6V,5400mAh or 8100 mAh ) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
| Power consumption | Average working current <100mA; Power save current <7uA; | |
| GSM antenna | Internal High Gain | |
| GPS antenna | Internal High Gain | |
| SIM | Microsim or ESIM | |
| Indicator | 2 status LEDs, Green: GPS, Red: EMTC | |
| Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
| Humidity | 5% ~ 95% (no fog) | |
| Ingress Protection Rating | IP67 | |
| More features: |
• AGPS
When the device successfully registers on network, AGPS is available to speed up the position speed and improve the position accuracy
• SMS and COM tool
SMS and COM tool for easy configuration.
• Low voltage power off
Device will immediately enter the low-power mode and will not wake up;
VCC voltage is lower than 2.7V;
VCC voltage is lower than 2.9V and the device has been continuously reset 6 times and the power is <=2%;
• APN auto adapt
The device has APN adapt features, however if APN is not in APN adapt list, APN configuration is required.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.
Contact Person: Ava Tian
Tel: +8615820785978
