|Battery:||Replaceable Lithium Ion||Celluar:||B2 B4 B12 B13 B3 B8 B20|
|Vibration Sensor:||Built In||Wifi 5.0:||5.1|
Rugged Excavator GPS Tracker,
5G Excavator GPS Tracker,
Lte-M Magnetic 5g gps tracker
NT08EF is 4G 5G Lte - M Battery Powered Rugged Easy Install Magnets Excavator GPS Tracker ,no wiring required, it can be easily put inside the excavator for a quick insllation and no labor costs involved.
1. Intelligent work modes
2. Support mulitiple celluar bands
3. Wifi and LBS indoors tracking
4. Bluetooth 5.1
5. Wifi 4.0
6. Conceal installation
7. Weatherproof enclosure
8. 8100 mAh battery
|Cellular||Communication module||Quectel BG95 M3|
Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85
• Cat NB2: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85
• EGPRS: 850/900/1800/1900MHz
protocol: Embedded TCP/IP stack
Output power: Class 4 (2W)@850/900MHz
Class 1 (1W)@1800/1900MHz
GPRS data: GPRS Class 10, Mobile Station Class B
Accuracy: 5m CEP
Cold start: <27s
Hot start: <1s
|Wifi position||Wifi 4.0|
Disposable Lithium-ion battery and (3.6V,20000mAh)
and ultra-low discharge rate:less than 1%, store one year below 25℃
|Power consumption||Average working current <100mA; Power save current 10uA;|
|GSM antenna||Internal High Gain|
|GPS antenna||Internal High Gain|
|Indicator||2 status LEDs, Green: GPS, Red: Celluar(Inside enclosure)|
|Environmental Parameter||Working Temperature||-20℃ ~ +70℃|
|Humidity||5% ~ 95% (no fog)|
|Ingress Protection Rating||IP67|
• Strong Magnets
NT07E is with built-in with super strong magnet that can firmly stick the device to the metal surface, it is easy to install and conceal, and the device is with waterproof function, which can be installed on any assets that are outdoors
• Temperature detect
The device built-in temperature sensor, it detects the temperature once the device is turned on, then will read it every 16 seconds. The temperature accuracy 95%.
• Wifi failure feature
After powering on the WIFI twice in a row, the serial port did not report any information, and followed the positioning packets it will report a WIFI failure alarm.
• Anti-Removal Alarm
There is a high sensitive light sensor at the bottom, if the device is tampered, either the device is working or in sleep mode, it will be activated and enter into anti-removal status and switch on anti-removal alarm, and report the alarm info to the backend or preset phone number.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.
Contact Person: Ava Tian