|
Product Details:
|
| Red Led Light: | GPRS Network Signal | Green Led Light: | GPS Signal |
|---|---|---|---|
| Blind Zone Compensation: | Support | Light Sensor: | Tamper Alarm |
| Weight: | 78g | Usage: | Gas Cylinder |
| High Light: | Waterproof wireless magnetic gps tracker,ROHS wireless magnetic gps tracker,ROHS Anti Theft Tracking Device |
||
Anti-Lost Waterproof Wireless Smart Asset Gas Cylinder Gps Tracker For Vehicle
Description
MT07 is a 2G asset GPS tracker with 2700Mah battery, compact size, and built-in GPS/GSM antenna, low cost, low data consumption. It’s ideally suitable for Asset tracking market.
Open the top cover of the terminal, insert the prepared SIM card into the SIM card holder, and then confirm that the SIM card button is well placed . Please make sure that the SIM card has the GPRS function available in advance and write down the SIM card number.
After installing the SIM card, turn the battery switch to the ON position. When the red light starts to flash, indicating that the terminal is powered on.
TCP/UDP connection mode setting
For example, the client's server IP is: 119.145.40.64, port number: 8881. If it is connected by TCP, use SMS to edit: *88*1119145040064*8881*1#; if it is UDP connection, edit: *88*1119145040064*8881*0#. The terminal will reply: set ok, the setting is successful.
Command format:HX,T#
Command description:T:wake up time,unit: minutes , default T:1440,value range :5-43200 minutes；for example,HX,1440#,set the wake up time is 1440 minutes (24 hours).
Remark: Normally we use the default setting 1440, if set shorter wakeup time, the working time of the terminal will be reduced.
Command format:ZZ,<A>[,T1,T2]#
Description: track mode
A: A=1, Enter track mode A=0 Exit track mode
T1: Set upload interval in track mode, Unit:Seconds
T2: Set the continue tracking upload interval, unit:minutes
ZZ,1,30,60# enter track model, upload interval is 30 seconds, enter sleep mode after 60 minutes
ZZ,0# Exit track mode
Command format:LBS,A#
Description
A=3:WIFI Position Priority；A=2: Switch off position function ；A=1:LBS+WIFI mode；A=0:GPS position priority；default A=3
Examples:LBS,1# enter LBS+WIFI position mode, Switch off GPS
Command Format:WAKEUP,[T1[,T2[,T3[,T4]]]]#
Description: Set a multiple points upload parameter, maximum 4 points T1…T4, it is allowed to set 1 clocks or more clocks, maximum supports 4
Example:WAKEUP,0800,1200,1600,2000#；
They are all clock points which will wake up at 8:00,12:00,16:00,20:00 and upload terminal parameter info
Remark: After entering into tracking mode, please remember to send command to make the device exit track mode, otherwise the power will be consumed fast if upload data frequently.
Specification
| Physical | Dimension | 64.5mm*41.5mm*25.5mm(L*W*H) |
| Weight | 78±5g | |
| Cellular | Communication module | Quectel MC25 |
| Frequency |
Working frequency: GPRS: 850/900/1800/1900MHz Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B |
|
| GPS |
Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
|
| Power | Battery |
Disposable Lithium-ion battery and (3.6V,2700mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
| Power consumption | Average working current <100mA; Power save current <15uA; | |
| GSM antenna | Internal High Gain | |
| GPS antenna | Internal High Gain | |
| SIM | Microsim | |
| Indicator | 2 status LEDs, Green: GPS, Red: GPRS | |
| Environmental Parameter | Working Temperature | -20℃~ +70℃ |
| Humidity | 5%~95% (no fog) | |
| Ingress Protection Rating | IP65 | |
FAQ
Q: Reply Time:
A: All inquiries will be answered within 24 hours.
Q: Payment Terms:
A: We accept payment by Visa Card, Master card, Alipay, Qiwi Wallet, Western Union and Bank Transfer T/T.
Q:Shipment Terms:
A: All orders can be shipped out within 1-3 working days normally. Once the order is shipped out, we will
send an email to you include the track number and the package photos.
Q:Customize and Sample:
A:OEM & ODM services are accepted if you place an order with enough quantity, and sample first is highly welcome.
Q: MOQ Limitation:
A: No MOQ limit, 1 pc for sample checking is available.
Contact Person: Jeson Huang
Tel: +8613632877844
