|
Product Details:
|
| LED: | 2 LED Lights For GPS And GSM | Color: | Black |
|---|---|---|---|
| Gsm Antenna: | Inbuilt Antenna | Gps Accuracy: | 5-10m(2drm) |
| Voltage: | 9-100V | Working Humidity: | 5%～95% |
| High Light: | 4G spy tracking devices,IP65 spy tracking devices,IP65 E Scooter GPS Tracker |
||
LT01 - C is a 4G LTE - 4 mini fleet management Wired motorcycle escooter car vehicle gps tracker, dual ip and mulitple protocols avaliable in almost poplar third - party platforms.Also wide voltage can be used for all kinds of vehicles which inclyding 9 - 100 volts.
FDD LTE:B1/B3/B4/B5/B7/B8/B28
WCDMA:B1/B2/B5/B8
GSM:B2/B3/B5/B8
| Physical | Dimension | 88mm*45mm*14mm(L*W*H) |
| Weight | 47±5g | |
| Cellular | Lte module | Fibcom L610 |
| Frequency |
Working frequency: 4G networks:TDD LTE/FDD LTE 3G networks:WCDMA 2G networks:GSM/GPRS Network Protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B |
|
| GPS |
Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP |
|
| Power | voltage | 9-100V |
| Battery | NI-MH 3.6V/60mA battery inside | |
| Power consumption |
Average Current: <30mA (DC 12V) Maximum current: <10mA (DC 12V) |
|
| Interface | Digital input(1) | Ignition |
| Digital output(1) | Relay | |
| GSM antenna | Inner | |
| GPS antenna | Inner | |
| Indicator | Green: GPS, Red: GSM | |
| Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
| Humidity | 5% ~ 95% (no fog) | |
| Ingress Protection Rating | IP65 | |
When the battery voltage on the vehicle is too low (0-11V or 19-22V), device will report a low voltage alarm to the backend
When the vehicle speed is higher than the preset alarm value, the device will notify the backend. Similarly, when the vehicle speed is lower than preset alarm value, a low speed alarm will be uploaded to the backend, this value is configurable.
The device supports vibration alarm, 10 minutes after the ignition off (Arm range 1-20 minutes), the device generates vibration (Delay range 1-10 mins) without ACC connected, the device will upload vibration alarm.
An alarm will be generated when the device is set to a displacement of more than 100 meters (message mode prompt), and the alarm information will be reported when the displacement radius exceeds 100 meters when the device is turned off. (Note: displacement range 100~2000m)
The device will send SMS if the vehicle is moved in ignition off status, if the radius is more than 100 meters, will upload towing alarm (Towing range:100-2000m)
5. GPS error alarm
When the device detects that the GPS/BD module is working abnormally, it reports the GPS receiver failure alarm to the backend
The device is with unique ID number, the factory can preset t IP, port and APN for customers, generally there is no need for customers to do parameter setting; However in case any configuration needs to be done, please follow below instructions and make sure the SIMs has SMS functions available
Contact Person: Ura Lee
Tel: +8615279458721
