Auto Waterproof location GSM GPS Trolley Tracker Magnetic Long Standby

Long Standby GSM GPS Tracker Auto Waterproof Magnet Locator Equipment GPS Tracker
 

3.1 Upload Interval in Sleep Mode

Command format:HX,T#
Command description:T:wake up time,unit: minutes , default T:1440,value range :5-43200 minutes；for example,HX,1440#,set the wake up time is 1440 minutes (24 hours).
 
Remark: Normally we use the default setting 1440, if set shorter wakeup time, the working time of the terminal will be reduced.

3.2 Track Mode

Command format:ZZ,<A>[,T1,T2]#
Description: track mode
A: A=1, Enter track mode A=0 Exit track mode
T1: Set upload interval in track mode, Unit:Seconds
T2: Set the continue tracking upload interval, unit:minutes
ZZ,1,30,60# enter track model, upload interval is 30 seconds, enter sleep mode after 60 minutes
ZZ,0# Exit track mode

3.3 Position Mode

Command format:LBS,A#
Description
A=3:WIFI Position Priority；A=2: Switch off position function ；A=1:LBS+WIFI mode；A=0:GPS position priority；default A=3
Examples:LBS,1# enter LBS+WIFI position mode, Switch off GPS
 

3.4 Clock Mode

Command Format:WAKEUP,[T1[,T2[,T3[,T4]]]]#
Description: Set a multiple points upload parameter, maximum 4 points T1…T4, it is allowed to set 1 clocks or more clocks, maximum supports 4
Example:WAKEUP,0800,1200,1600,2000#；
They are all clock points which will wake up at 8:00,12:00,16:00,20:00 and upload terminal parameter info
 
Remark: After entering into tracking mode, please remember to send command to make the device exit track mode, otherwise the power will be consumed fast if upload data frequently.

4.1 SIM card installation

Open the top cover of the terminal, insert the prepared SIM card into the SIM card holder, and then confirm that the SIM card button is well placed . Please make sure that the SIM card has the GPRS function available in advance and write down the SIM card number.

4.1.5 Intelligent Tracking Function

When found the vehicle is stolen or in other emergency cases and the real time location of the vehicle needs to be checked, a SMS can be sent or send a command from the backend, when the terminal starts work next time, it will receive this command and enter into track mode, and upload the location data according to the preconfigured interval by customer until a stop tracking command is received

4.1.6 Blind Zone Compensation

When the terminal enter into blind zone when in sleep mode,it will store the trace data according to the preconfigured time interval and it will upload the data in the blind zone to the backend
 
Remark: MT07/MT07C upload 16-32 pack blind zone compensation data, MT07W/MT07CW uploads 8-16 pack blind zone compensation data.

4.1.7 Clock Mode

The terminal could verify the timely wake up time points, maximum 4 points can be set for more accurate position and connection to the server, this function could use SMS command or backend command to set

4.1.8 Backend Specific Commands

Since the working time of the terminal is short, it is rare to receive the SMS, to ensure the command sending efficiently, the backend uses a specific commands for MT06CW which can preset the command, when the terminal is online, the backend will automatic send this command, to make sure the commands is properly received.

4.1.9 Battery Level Detect

The terminal will upload the battery level status together with the location data pack, and display the battery level on the backend so the user could well know the balance battery, and meanwhile display the current transmission time and the balance battery level of the next uploading pack, so the user could have clear view on the terminal status

4.1.10 Light Sensor Detect

At Bottom of MT07/MT07W is built in with high sensitive light sensor, when the terminal is tampered, the terminal will be activated even in sleep mode and enter into tamper alarm working mode, and upload the alarm function to the backend

4.2 Function List