|
Product Details:
|
| Bluetooth: | 5.0 | Battery: | 12000 Lithium Ion Rechargeable |
|---|---|---|---|
| Weight: | 503 G | Celluar: | Global GSM And CatM Bands |
| Waterproof: | IP67 Ingress | Color: | Black And Grey |
| Highlight: | 12000Mah Battery Operated Gps Tracker,IP67 Battery Operated Gps Tracker,12000Mah sim gps tracker |
||
NT09EF is a 4G CatM1 Non - Powered 12000 Mah Wifi AGPS LBS Rechageable Assets Tracker ,It can be charged by Type-C USB , exceptionally it has the most frequent position updates of every 10s, the time is configurable while using in different cases .
Features:
◆ Real time and historical locations, frequent reporting, alerts and different intervals for moving/stop.
◆ Removal alert, when the device is pulled off from asset, it will send an alert to platform (not supported with magnets)
◆ Multiple position mode: GPS, Wifi,AGPS, LBS
◆ ibeacon
◆ Jamming detection
◆ IP67 waterproof, rugged construction
◆ Periodic tracking/Adaptive tracking/Movement based tracking/Sleep mode
e
Specifications:
| Physical | Dimension | 154mm*82mm*30mm(L*W*H) |
| Weight | 350±5g | |
| Cellular | Communication module | Quectel BG95 |
| Frequency |
Working frequency: Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 • Cat NB2: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85 • EGPRS: 850/900/1800/1900MHz
protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B |
|
| GPS |
Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
|
| Processor | ST | |
| Motion sensor | DA260 | |
| Wifi position | Wifi 4.0 | |
| Power | Battery |
Rechargeable Lithium-ion battery and (3.7V, 12000mAh Lithium Ion) and ultra-low discharge rate:less than 2%, store one months below 25℃
|
| Power consumption | Average working current <50mA; Power save current <40uA; | |
| GSM antenna | Internal High Gain | |
| GPS antenna | Internal High Gain | |
| SIM | Microsim | |
| Indicator |
3 status LEDs, Green: GPS, Red: Network, Blue: battery |
|
| Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
| Humidity | 5% ~ 95% (no fog) | |
| Ingress Protection Rating | IP6 | |
| More features: |
• Hardware definition
| Cellular LED (Red) | Event | Status |
| Network connecting | Fast flash | |
| Network connected | Slow flash | |
| Module error | Solid on | |
| Position LED(Green) | GPS position | Solid on |
| LBS position | 0.5 seconds on, 0.5 seconds off | |
| Wifi Position | 2 seconds on, 2 seconds off | |
| No position | Off | |
|
Charging LED( Blue) |
100% charging | 4 lights solid on |
| 75%-80% charging | 3 lights solid on and 1 light flash | |
| 56%-74% charging | 3 lights solid on and 1 light off | |
| 50%-55% charging | 2 lights solid on, 1 light off,1 light flash | |
| 30%-49% charging | 2 lights solid on, 2 lights off | |
| 25%-29% charging | 1 lights solid on, 2 lights off,1 light flash | |
| 10%-24% charging | 1 lights solid on, 3 lights off | |
| 1%-9% charging | 1 light flash,3 lights off |
• History data upload
When the device enter into blind zone when in sleep mode, it will store the trace data according to the preconfigured time interval and it will upload the data in the blind zone to the backend when the cellular network recovers
Kindly reminder: To use Wi-Fi feature, please make sure your software supports Wi-Fi database
When the GPS module is turned on, there is no GPS data output for 90 seconds, and the GPS receiver failure alarm will be reported
After powering on the WIFI twice in a row, the serial port did not report any information, and followed the positioning packets it will report a WIFI failure alarm;
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.
Contact Person: Ms. Ava Tian
Tel: 0086 15820785978
