|
Product Details:
|
| Bands: | Global | GPS: | Super Sensivity |
|---|---|---|---|
| Light Sensor: | Built In | Wifi: | 4.1 |
| Shell: | Waterproof | Color: | Black |
| High Light: | Waterproof GPS Asset Tracker,Lithium Battery GPS Asset Tracker,CatM1 small waterproof gps tracker |
||
NT07ED is a CatM1 Global Connectivity Disposable Lithium Battery Waterproof GPS Asset Tracker, this device support global bands, it comes with built in G-sensor and motion sensor which can detect motion and collsion alarm, the device also has a light sensor inside for tamper alarm for anti - theft purpose.
Features:
1. CatM1 and NBIOT technology, it can fall back to 2G.
2. Support European bands and North America bands
3. On board light sensor for removal and tamper alarm
4. Long standby life time
5. Collision and motion detect
6. Multiple working modes
7. IP67 waterproof enclosure and shell
8. Anti - theft
Specifications:
| Physical | Dimension | 81mm*51mm*31mm(L*W*H) |
| Weight | 192±7g | |
| Cellular | Communication module | Quectel BG95 or BG96 |
| Frequency |
Working frequency: • Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 |
|
| GPS |
Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
|
| Power | Battery |
Disposable Lithium-ion battery and (3.6V,5400mAh or 8100mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
| Power consumption | Average working current <101mA; Power save current <10uA; | |
| GSM antenna | Internal High Gain | |
| GPS antenna | Internal High Gain | |
| SIM | Microsim | |
| Indicator | 2 status LEDs, Green: GPS, Red:Celluar | |
| Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
| Humidity | 5% ~ 95% (no fog) | |
| Waterproof standard | IP67 | |
| More features: |
• Strong Magnetic and Waterproof Function
NT07ED is with built-in with super strong magnet that can firmly stick the device to the metal surface, it is easy to install and conceal, and the device is with waterproof function, which can be installed on any assets that are outdoors.
• LBS
The default position mode is by GPS, however when device enters into the blind zone and GPS cannot be fixed, the device will switch to LBS position, LBS provides the reference location which is might not accurate
• Motion Alarm
The motion is in static mode and the motion alarm is turned on, and the motion alarm will be reported following the positioning after being awakened by motion.
• GPS Failure Alarm
When the GPS module is turned on, there is no GPS data output for 90 seconds, and the GPS receiver failure alarm will be reported
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.
Contact Person: Ava Tian
Tel: +8615820785978
