|Bands:||B2 B4 B12 B13||Wifi:||4.0|
|GPS:||High Gain GPS||Waterproof:||IP67|
NB-IoT Bluetooth Asset Tracker,
Compact bluetooth asset tracker,
Lte-M battery powered asset tracker
NT07EC is a Lte - M NB - IoT Compact Battery Powered Indoors And Outdoors GPS Assets Tracking with 5 years Long Standby life, it has built in G-sensor for collision and motion purpose, the device has built light sensor for removal and tamper alarm, it can be used in many assets for example generators, cadges, trailers, pallets and vehicles as well.
1. Portable and easy installation
2. LBS, AGPS, GPS position
3. Indoors and outdoors tracking
5. Clock mode
6. Temperature monitor
7. Motion and static mode
8. Periodic tracking
|Cellular||Communication module||Quectel BG95 M3|
• Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85
Accuracy: 5m CEP
Cold start: <27s
Hot start: <1s
Disposable Lithium-ion battery and (3.6V,8100mAh)
and ultra-low discharge rate:less than 1%, store one year below 25℃
|Power consumption||Average working current <99mA; Power save current <10uA;|
|GSM antenna||Internal High Gain|
|GPS antenna||Internal High Gain|
|Indicator||2 status LEDs, Green: GPS, Red:Celluar|
|Environmental Parameter||Working Temperature||-20℃ ~ +70℃|
|Humidity||5% ~ 95% (no fog)|
|Ingress Protection Rating||IP67|
• Wifi for indoors tracking
The device has built in Wi-Fi Chip, it automatically connects to the WIFI hotspot nearby and filter the hotspot info then select the WIFI hotspots with strongest signal, the device will pack those hotspots info and saved into the packet that will be uploaded, after the backend receives Wi-Fi information, it will interpret the WIFI info and acquire the current location from the Wi-Fi database, The default setting is WIFI priority, once it detects WIFI Hotspot, it will upload WIFI info only , and do not use GPS, if WIFI is not detected, it will use GPS to position.
• Temperature detect
The device built-in temperature sensor, it detects the temperature once the device is turned on, then will read it every 16 seconds. The temperature accuracy 95%.
• OTA commands from backend
Since the wake up of the device is short, it is hardly to receive SMS , to ensure the command sending efficiently, we suggest an OTA commands to be sent from the platform, when the device is online, the backend will automatic send this command, to make sure the commands is properly received.
The default setting is upload once a day, the upload packet information includes: Position status, longitude and latitude, network signal Strength, satellite numbers, battery voltage etc, the upload interval can be configured either by SMS or through tracking platform software
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.
Contact Person: Ava Tian