|
Product Details:
|
| Battery: | 8100Mah | Temperature: | Internal |
|---|---|---|---|
| GPS: | High Gain GPS | Celluar: | QUECTEL BG95 |
| Waterproof: | IP67 | G-sensor: | DA260 |
| Enclosure: | Plastic | ||
| High Light: | Non Powered GPS Asset Tracker,Long Standby GPS Asset Tracker,IP67 long standby gps tracker |
||
NT06F is an IP67 waterproof non powered long standby asset gps tracker by using Lte-M technology with low power consumption and less celluar data costs than comparing with Lte Cat1 and Cat4, it is able to work more than 5 years ,It’s ideally suitable for Asset tracking market.
Features:
1. Multiple work modes: Regular, Clock, Track ,motion and static modes
2. Built in G-sensor Temperature monitor
3. Built in light sensor
4. GPS+AGPS+LBS+WIFI position
5. Jamming detection
6. Ultra low power consumption
7. Strong magnetic for easy installation
8. Tamper alarm
Specifications:
| Physical | Dimension | 81mm*51mm*31mm(L*W*H) |
| Weight | 192±6g | |
| Cellular | Communication module | Quectel BG95 |
| Frequency |
Working frequency: • Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 |
|
| GPS |
Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s |
|
| Power | Battery |
Disposable Lithium-ion battery and (3.6V,5400mAh or 8100) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
| Power consumption | Average working current <100mA; Power save current <7uA; | |
| GSM antenna | Internal High Gain | |
| GPS antenna | Internal High Gain | |
| SIM | Microsim or ESIM | |
| Indicator | 2 status LEDs, Green: GPS, Red: EMTC | |
| Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
| Humidity | 5% ~ 95% (no fog) | |
| Ingress Protection Rating | IP67 | |
| More features: |
• AGPS
When the device successfully registers on network, AGPS is available to speed up the position speed and improve the position accuracy
• LBS
The default position mode is by GPS, however when device enters into the blind zone and GPS cannot be fixed, the device will switch to LBS position, LBS provides the reference location which is might not accurate
• OTA commands from backend
Since the wake up of the device is short, it is hardly to receive SMS , to ensure the command sending efficiently, we suggest an OTA commands to be sent from the platform, when the device is online, the backend will automatic send this command, to make sure the commands is properly received.
• Tracking
The default setting is upload once a day, the upload packet information includes: Position status, longitude and latitude, network signal Strength, satellite numbers, battery voltage etc, the upload interval can be configured either by SMS or through tracking platform software
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.
Contact Person: Ava Tian
Tel: +8615820785978
